[Epoxy Resin] Dried Flower Bookmark

Tools and Materials Preparation

• Materials: Regular epoxy resin , Bookmark mold, Gold foil, Dried roses, Metallic chrome marker, Mica powder
• Protective Equipment: Always wear respirator, nitrile waterproof gloves, a waterproof apron for safe handling.

Environment Setup

• Ideal Conditions: Maintain a temperature between 73–78°F with humidity no higher than 50–60% RH.
• Ventilation: Work in a well-ventilated area, ideally near a window or use an air purifier for better airflow.

Step-by-step Instructions

Step 1

Mix epoxy resin in a 1：1 ratio by volume. Divide the mixture into 4 cups. Add red, gold, and white mica powder to three of the cups and stir well, leaving one cup clear.

Step 2

Crush the dried roses and gold leaf into small pieces, then mix them thoroughly with the resin.

Step 3

Pour the prepared resin into both sides of the bookmark mold, then add the dried roses. Let the mold sit undisturbed for about 12 hours until fully cured.

Step 4

Once cured, use a metallic marker to highlight the kitten design on the mold (or any other embossed patterns).

Step 5

Finish by adding stickers, names, or short greetings. This little detail makes the bookmark extra special, whether for yourself or as a gift!

Pro Tip