[Epoxy resin] Pet Hair Memorial

Tool and Material Preparation

• Materials: Regular epoxy resin , cat and dog molds, pet hair, 60-color mica powder set, black colorant, stickers
• Protective Equipment: Always wear nitrile waterproof gloves, a waterproof apron, and a respirator for safe handling.

Environment Setup

• Ideal Conditions: Maintain a temperature between 73–78°F with humidity no higher than 50–60% RH.
• Ventilation: Work in a well-ventilated area, ideally near a window or use an air purifier for better airflow.

Step-by-step Instructions

Step 1

Place your pet’s hair into the mold, filling it to about two-thirds of the height.

Step 2

Combine epoxy resin in a 1:1 ratio by volume, stir thoroughly, then pour it into the mold. Leave some space at the top for a finishing coat. Allow it to cure for about 12 hours.

Step 3

Mix epoxy resin with a touch of white mica powder and a drop of black colorant. Pour this layer over the cured resin as a topcoat and let it set completely.

Step 4

Once cured, gently demold your piece and attach your pet’s name. Your exclusive keepsake is now ready, a loving tribute that will last a lifetime. This keepsake is not just a craft, it’s a way of carrying your pet’s love with you always.

Pro Tip