Silicone Mold Making Kit Guide
Not sure how to choose the right silicone rubber hardness? Don’t worry—this silicone guide is here to help!！
We will guide you to understand silicone rubber of different hardness levels from the following aspects, allowing you to take your creative skills to the next level!
- Advantages and limitations of different silicone types
- Step-by-step operation process
- Recommended project types
- Common usage issues
Advantages and limitations of different silicone types
The main differences among various types of silicone:
0A Shore Hardness Silicone Rubber
Advantages
Best flexibility among all types; Perfectly captures fine details of small, intricate objects without damaging the master mold during demolding; Excellent flowability, easily fills extremely narrow gaps
Features
Soft texture, easily deformed under, force semi-transparent finish makes bubble inspection easier
Recommended Project Type
1.Small and delicate items: jewelry, miniature landscapes, and objects with complex patterns
2.Special uses: picky pad
Limitations
Not suitable for tall molds; insufficient structural support may lead to deformation
10A Shore Hardness Silicone Rubber
Advantages
Balanced between the “too soft” 0A and the “harder” 15A, offers some flexibility while resisting deformation better than 0A, it is suitable for small and complex parts with slight requirements for "support"
Features
It has a high tolerance for operational errors, colored formula makes it easy to check if mixing is even holds shape better than 0A after molding
Recommended Project Type
1.Small-to-medium complex structures: soap molds with raised patterns, layered candle molds
2.Transitional use a “practice grade” between 0A and higher-hardness silicones, or for projects needing both flexibility and mild support (such as silicone inlay)
Limitations
Slightly less effective than 0A for extremely fine detail replication. Not suitable for very large pieces due to limited hardness, which can cause mold collapse
15A Shore Hardness Silicone Rubber
Most balanced overall performance, Combines flexibility and hardness, covering nearly 80% of molding needs, Known as the “universal grade ”Features Medium hardness and tear resistance, very beginner-friendly
Recommended Project Type
1.Wide range of handmade items: soaps, plaster ornaments, resin crafts and so on
2.Medium complexity items: ceramic replicas with simple patterns, small-to-medium cement molds
3.Special uses: picky pad
20A Shore Hardness Silicone Rubber
Advantages
Very similar to 15A
Features
Higher transparency makes it easier to see pouring details
Recommended Project Type
1.Wide range of handmade items: soaps, plaster ornaments, resin crafts and so on
2.Hard material compatibility: cement, fiberglass items, reliefs, sandstone panels
Limitations
Higher hardness makes demolding tall pieces difficult; often requires cutting the mold to release
30A Shore Hardness Silicone Rubber
Advantages
Highest hardness, strongest support, Perfect for large molds or two-part mold
Features
After curing, the shape is stable, and even for items with a large mold weight, it is not easy to deform. The color can easily show the uniformity of the mixture
Recommended Project Type
1.Medium-to-large items: sculpture replicas, resin furniture parts
2.Specialized molds: 2-part combination molds (e.g., auto parts, tool components)
Limitations
Low flexibility; not suitable for fragile master molds as they may break during demolding.
Tip: These silicones are not suitable for use with UV resin, 3D printing materials, or certain clays, as they may fail to cure properly.
40A Silicone Putty ALR00030
Advantages Silicone putty is a solid, kneadable elastomer that allows direct shaping, pressing, cutting, and quick mold making without the need for tools or complex steps. Simply mix, knead, and apply. It has virtually no learning curve, making it very beginner-friendly.
In contrast, liquid silicone is pourable and requires accurate measuring, mixing, and controlled curing conditions, which makes it more suitable for detailed or advanced projects.
Features
- Fast 30-minute curing for quick mold creation
- Easy to handle - no mixing cups or equipment needed
- Ideal for on-the-spot mold making or simple shape duplication
Recommended Project Type
Best for small, simple objects such as:
- Jewelry pieces
- Small decorative items
- Buttons, charms, or small craft components
Limitations
Silicone putty has lower flexibility and tear strength compared to liquid silicone.
- Not suitable for highly detailed, intricate, or deep 3D objects
- May not capture very fine textures
- Limited lifespan for repeated molding of complex shapes
Note: These silicones are not suitable for use with UV resin, 3D printing materials, or certain clays, as they may fail to cure properly.
Step-by-step operation process
1.Workspace & Material Preparation
Materials: Silicone Rubber
Tools: Measuring cups, clean stir sticks, mold frames (0.4–0.8in taller than the master mold to prevent overflow), trimming scissors (for excess edges), hot glue, digital scale, toothpicks (for bubble removal)
Protective Tools: Gloves, N95 mask, silicone mat (protects tables and makes cleanup easier)
2. Environment Setup
Ideal Conditions: Ideal 77°F; curing time extends by 1–2 hrs for every 41°F decrease. Overheating (>77°F) may cause premature curing and bubbles are difficult to expel.≤60% recommended; high humidity may cause foggy white spots on silicone surface.
Ventilation: Work in a well-ventilated area, ideally near a window or use an air purifier for better airflow.
| Process | Production process |
|---|---|
| Frame Setup | Build a mold frame around the master and seal edges to prevent leakage; Reserve space for the flow of silicone |
| Fixing the Master | Secure master with hot glue at the center of the frame to prevent shifting |
| Mixing | Measure silicone into a cup, mix 1：1 by weight |
| Stirring | Stir slowly in one direction for 3–5 minutes, ensuring no unmixed silicone on cup walls or bottom. Avoid vigorous stirring to reduce bubbles |
| Coloring (Optional) | Add silicone color paste after mixing, stir 1 minute until even |
| Degassing | ①Let sit for 5–10 minutes and pop surface bubbles with a toothpick ②Or use a vacuum chamber for faster bubble removal |
| Pouring | Slowly pour silicone along the inside wall of the frame (avoid direct impact on the master). Target height: 0.2–0.4in above the tallest master point. For indented masters, pre-fill cavities before full pour, then slowly increase it to the target height |
| Curing | Leave undisturbed for 4–6 hrs at 77°FTo determine the curing process: Gently touch the surface of the silicone with your finger. If it does not stick to your hand and has elasticity, the curing is complete |
| Demolding | After curing, remove the frame first. Peel slowly along the arc of the master mold |
| Trimming | Cut molds excess edges with scissors |
| Cleaning | Wipe the surface of the mold with an alcohol cotton pad to remove any residue. Soak the tools in alcohol, clean them, dry them and set them aside for later use |
Recommended project types
| Hardness | Specific example |
|---|---|
| 0A | Small and complex items: Jewelry (rings, pendants)、miniature landscape model、fine-pattern clay pieces、small gear-shaped ornaments、soap, candles, silicone inlay, picky pad |
| 10A | Small and complex items: Jewelry (rings, pendants)、miniature landscape model、fine-pattern clay pieces、small gear-shaped ornaments、soap, candles, silicone inlay, picky pad |
| 15A | Medium-to-large items: sculpture replicas, resin furniture parts, cement planters, sandstone reliefs, picky pad |
| 20A | Medium-to-large items: soap, layered candles, auto parts, tool molds, mechanical parts |
| 30A | Medium-to-large items: Automobile parts models, tool accessories, and replicas of mechanical parts with complex structures |
Common Usage Issues
