Stanley Chrome Powder Name Plate
Stanley Chrome Powder Name Plate
Create stunning resin nameplates with 6 floral patterns! Perfect for beginners - just 1 hour to mix colors, add pearls, and personalize names.
Difficulty: ★★☆☆☆
Crafting time: About 1 hour
Materials Preparation
- Materials: Regular Epoxy Resin, Regular UV Resin, Stanley Nameplate Mold, Ocean White Pigment Paste, Stickers, Pearls, Chrome Powder
- Tools: UV Lamp, Measuring Cup, Mixing Stick
- Protective Equipment: Always wear nitrile waterproof gloves, a waterproof apron, and a vapor mask for safe handling.
🌡️Environment Setup
- Ideal Conditions: Maintain a temperature between 73–78°F with humidity no higher than 50–60% RH.
- Ventilation: Work in a well-ventilated area, ideally near a window or use an air purifier for better airflow.
🔍 Step-by-step Instructions
Step 1
Brush chrome powder inside the mold using a soft brush for better adhesion. An eyeshadow brush works perfectly!
Step 2
Mix epoxy resin thoroughly at a 1:1 volume ratio. Stir with a stick until it’s completely smooth with no silk-like strands. Add ocean white pigment paste, mix evenly, and let it sit for 10 minutes so any bubbles can rise and escape. Then pour the resin into the mold.
Step 3
Let the resin cure completely for 12–24 hours before demolding.
Step 4
Use a cutting machine to create the name sticker and apply it to your finished piece.
Step 5
Coat the edges with UV resin, decorate with pearls, and cure under a UV lamp.
Step 6
Pour a thin layer of clear epoxy resin on top as a sealing layer. This protects the attached name from peeling or fading.
Step 7
After 24 hours of curing, your custom Stanley nameplate is ready! Its sparkling shine showcases your creativity.
Even if you don’t use it as a cup lid, it can become a keychain pendant or other decorative piece. Feel free to get creative, add patterned fillers, dried flowers, sequins, or other embellishments inside. Roll up your sleeves and let your imagination shine!
